t: +44 (0)1273 732286e: [email protected]

Full Specification

Made in Japan
Fanuc 0iMF control
X / Y / Z axes 640 / 610 / 680mm
Spindle centre to pallet surface 50~660mm
Spindle nose to pallet centre 100~780mm
Pallet top height (from the floor) 1069mm
Pallet size 400 x 400mm
Max work piece diameter Ø750 (2/6APC), 650mm (8APC)
Max work piece height 1000mm (2APC), 900mm (6/8APC)
Max load 500kg
Configuration 25-M16 P=80mm
Min indexing degree 0.001°
Indexing speed 1.1 sec / 90°
Pallet clamping force / system 9.8kN x 4 cones / mechanical lock
B axis clamping torque 5000Nm
Spindle speed 12,000rpm (15,000 direct drive/20,000 built in opt)
Spindle rated torque 241Nm
Spindle taper ISO7/24 taper NT no 40
Rapid feed (X/Y/Z) 74,000mm/min
Cutting feed (X/Y/Z) 30,000mm/min
Table rotating speed 66.6rpm
Acceleration (X/Y/Z) 1.0/1.0/1.0G
Number of pallets 2
Pallet change system Rotation
APC time (unclamp-clamp) 13 sec
Type of tool shank BT40/CAT40
Type of pull stud JIS
Number of tools 40 (60/80/120/220 opt)
Max tool diame ter Ø70mm / Ø140mm (adjacent posts full / empty)
Max tool length 400mm
Max tool weight 8kg
Tool to tool 0.9 sec
Chip to chip 2.8 sec
Spindle motor 22/15kW
Feed axis motor (X/Y/Z/B) 4.5/4.5/4.5/2.7kW
Lubrication pump motor 18W
Coolant pumps 600W x 3pcs
Hydraulic pump 2.2kW
Electric voltage 200V
Electric power supply 50KVA
Air pressure 0.4MPa
Air volume 360L/min
Hydraulic unit tank 20L
Coolant tank 550L
Lubrication unit tank 1.8L
Machine dimensions (LxDxH, w/o swarf conveyor) 2398 x 4539 x 2766mm
Machine weight 9200kg


We are also official UK dealers for a number of high profile international tool manufacturers.


Latest Tweets