t: +44 (0)1273 732286e: [email protected]

Full Specification

Made in Japan
Fanuc 32i control
 
X / Y / Z axes 640 / 610 / 680mm
Spindle centre to pallet surface 50~660mm
Spindle nose to pallet centre 100~780mm
Pallet top height (from the floor) 1069mm
Pallet size 400 x 400mm
Max work piece size Ø750 x 1000mm
Max load 500kg
Configuration 25-M16 P=80mm
Min indexing degree 0.001°
Indexing speed 1.1 sec / 90°
Pallet clamping force / system 9.8kN x 4 cones / mechanical lock
B axis clamping torque 5000Nm
Spindle speed 10,000rpm direct drive (12,000/15,000rpm direct drive / 20,000rpm built in opt)
Spindle rated torque 118Nm
Spindle taper ISO7/24 taper NT no 40
Rapid feed (X/Y/Z) 60,000mm/min
Cutting feed (X/Y/Z) 10,000mm/min
Table rotating speed 33.3rpm
Acceleration (X/Y/Z) 0.5/0.6/0.7G
Number of pallets 2
Pallet change system Rotation
APC time 7 sec
Type of tool shank MAS BT40/CAT40
Type of pull stud JIS
Number of tools 40 (60/80/120/220 opt)
Max tool diameter Ø70mm / Ø140mm (adjacent posts full / empty)
Max tool length 400mm
Max tool weight 8kg
Tool to tool 0.9 sec
Chip to chip 2.8 sec
Spindle motor 15/18.5kW
Feed axis motor (X/Y/Z/B) 4.5/4.5/4.5/2.7kW
Lubrication pump motor 23W
Coolant pumps 400W x 1pc, 600W x 2pcs
Hydraulic pump 2.2kW
Electric voltage 200V
Electric power supply 50KVA
Air pressure 0.5MPa
Air volume 360L
Hydraulic unit tank 20L
Coolant tank 550L
Lubrication unit tank 1.8L
Machine dimensions (LxDxH, w/o swarf conveyor) 2398 x 4539 x 2565mm
Machine weight 40ATC: 9100kg, 60ATC: 9200kg

 

We are also official UK dealers for a number of high profile international tool manufacturers.

ManufacturerLogos

Latest Tweets