t: +44 (0)1273 732286e: [email protected]

Full Specification

Made in Taiwan
Fanuc 0iTF control with Manual Guide i
   
Swing over bed 530mm
Swing over cross slide 310mm
Distance between centres 1000/1500/2000/3000/4000mm
   
Bed width 435mm
   
Spindle nose D1-8 (D1-11)
Spindle bore 104mm (130mm)
Spindle speed Low 50~300rpm High 300~1500rpm (300~1000rpm)
Spindle taper MT10 (MT15)
   
X axis travel 360mm
Z axis travel 700/1200/1700/2700/3700mm
Y axis (opt) ±40mm
   
X axis rapids 5m/min
Z axis rapids 7.5m/min
Cutting feed rate 0.001~500mm/rev
   
Main motor 18.5kW
X axis AC servo motor 5.3/4.36kW/20.8Nm/2000rpm
Z axis AC servo motor 7.3/4.36kW/20.8Nm/2000rpm
Oil pump 80W
Coolant pump 1/2hp
Hydraulic tank pump (opt) 3hp (2.2kW)
   
Hydraulic tank capacity (opt) 20L
Lubrication pump 2L
   
Ballscrew – X axis diameter 25mm / pitch 5
Ballscrew – Z axis diameter 50mm / pitch 10
   
Tailstock quill diameter 90mm
Tailstock quill travel 203mm
Tailstock quill taper MT5
   
Dimensions Length – 3390/3890/4390/5390/6390mm Depth - 2180mm Height – 1730mm
Weight 4500/5100/5500/6500/7500kg

 

We are also official UK dealers for a number of high profile international tool manufacturers.

ManufacturerLogos

Latest Tweets