t: +44 (0)1273 732286e: [email protected]

Full Specification

Made in Japan
Fanuc 0iMF control
 
X / Y / Z axes 510 / 510 / 510mm
Spindle centre to pallet surface 50~560mm
Spindle nose to pallet centre 100~610mm
Pallet top height (from the floor) 1069mm
Pallet size 400 x 400mm
Max work piece size Ø550 x 850mm
Max load 500kg
Configuration 25-M16 P=80mm
Min indexing degree 0.001°
Indexing speed 1.1 sec / 90°
Pallet clamping force / system 9.8kN x 4 cones / mechanical lock
B axis clamping torque 2900Nm
Spindle speed 12,000rpm (15,000 direct drive opt)
Spindle rated torque 96Nm
Spindle taper ISO7/24 taper NT no 40
Rapid feed (X/Y/Z) 80,000mm/min
Cutting feed (X/Y/Z) 30,000mm/min
Table rotating speed 37rpm
Acceleration (X/Y/Z) 1.0/1.0/1.0G
Number of pallets 2
Pallet change system Rotation
APC time (unclamp-clamp) 13 sec
Type of tool shank MAS BT40/CAT40
Type of pull stud JIS
Number of tools 40 (60 opt)
Max tool diameter Ø85mm / Ø140mm (adjacent posts full / empty)
Max tool length 400mm
Max tool weight 8kg
Tool to tool 0.9 sec
Chip to chip 2.8 sec
Spindle motor 15/7.5kW
Feed axis motor (X/Y/Z/B) 4.5/4.5/4.5/2.7kW
Lubrication pump motor 18W
Coolant pumps 600W x 3pcs
Hydraulic pump 2.8kW
Electric voltage 200V
Electric power supply 41KVA
Air pressure 0.4MPa
Air volume 360L
Hydraulic unit tank 10L
Coolant tank 300L
Lubrication unit tank 1.8L
Machine dimensions (LxDxH, w/o swarf conveyor) 1530 x 3958x2788mm
Machine weight 40ATC: 7400kg, 60ATC: 7700kg

 

We are also official UK dealers for a number of high profile international tool manufacturers.

ManufacturerLogos

Latest Tweets